Splinters on wood furniture can ruin the entire look of a table, a chair or any item, especially if it is in an obvious location. These occur because of damage, natural formations in the wood or poor workmanship. If they are not repaired they can chip off altogether. However, they are usually easy to fix in just a few simple steps. Consider trying to repair the damage instead of taking a chance on further damage. Use these easy ways to fix splinters on wood furniture, and solve the problem without spending a small fortune on the repair.
Fix it with Wood Glue of the Highest Quality
It is best to fix splinters as soon as they are noticed. This will prevent them from catching on fabric or other items before being pulled off altogether. It is also important to fix splinters quickly to prevent injury since they can be quite sharp.
Gorilla brand glue is one of the highest quality adhesives, and I highly recommend it for making this and all other simple furniture repairs. Buy a clear-drying variety especially formulated for wood, and follow product label directions for best results when trying to fix splinters on furniture or any other wooden items.
Remove Dust and Debris from the Splintered Area
When preparing to fix splinters on wood furniture, begin by removing any dust and debris. You will sometimes see material fibers on wood splinters. This is an indication of how the damage occurred since clothing can catch when the wood is raised and damaged. Use a small pointed tool or a toothpick to gently and carefully clean out the impressions. Do this without pulling the splinters out any further and causing more damage.
Glue it Firmly Back into Place
Next, apply the recommended glue to the tip of a pointed tool, and sparingly apply it to the furniture beneath the splintered areas. Try not to apply it in any other location. Press the splinters firmly into place, and wipe away any excess adhesive with a soft clean cloth. If it is located on the rung of a chair or the leg of a table, wrap it with a piece of masking tape to hold the repair as the adhesive dries. Otherwise, place something heavy on top of the repair to keep the splinter from popping back up until the adhesive dries completely. When completed carefully and correctly, the furniture should look as good as new, and the patch should be nearly invisible.