A volume measurement device like a 3D level scanner has to be used very carefully. Just as you need to follow all safety instructions while using any sort of instrument at home, the same thing has to be done while using any device in any kind of industry. Before beginning with the installation process all the technical requirements have to be monitored very carefully. Then the conditions where this device can work properly have to be checked. It is very important to know exactly in what kind of an atmosphere will this device work. Only then the installation process of the measurement device must begin.
Apart from these, there are some generally safety precautions that you have to follow while using the volume measurement device.
If for any reason you have to open the electronics compartment of the device, make sure that there is no hazardous environment present around the device.
Secondly due to rubbing against the walls of the containers, there is a chance there could be a spark. Therefore the scanner has to be mounted in such a way that there is no friction between the body of the scanner and any other material.
Grounding of the entire scanner has to be done properly.
Regarding the use of cables, it has to be seen to it that tension-free cable entry is provided. The pressure screw needs to be very tight. If there are any unused openings, they have to be shut tightly too. All the wires used must meet the technical requirements. Also the materials of the cable wires have to be such that they are able to bear the temperature requirements of the container.
A list of all the requirements of the volume measurement device is provided before the device is installed in the container. It is necessary to follow all the specifications as mentioned in the manual. This will ensure that there will be no accidents or injuries while the volume measurement process is taking place and accurate readings are obtained without any delay.
Share your experience in medical health